We just upgraded our bar with hanging egg chairs!

The dimensions of the egg chair with stand is 56.7″ H x 29.5″ W x 33.1″ D.

How high is the chair off of the ground?

An egg chair with a stand is typically about 66 cm off of the ground, give or take a few centimeters. This measurement can vary depending on the manufacturer and model of the chair. The height of the stand also varies, but it is usually around 45 cm.

What is included in the set?

The egg chair with stand is a comfortable, stylish piece of furniture that can be used in a variety of settings. The set includes the egg chair and the metal stand. The chair is made from high-quality materials and is designed for durability and comfort. It has a soft, plush cushion that cradles your body and provides support while you relax or work. The steel frame ensures that the chair remains sturdy and stable, even when you’re sitting in it for extended periods of time. And the stylish design will add a touch of sophistication to any room.

Can you adjust how high or low the chair sits?

Yes, you can adjust how high or low the chair sits. The height of the egg chair with stand is adjustable on both the seat and the stand. To adjust the seat height, loosen the knob at the top of the post and pull up or push down on the seat to desired height. Then tighten knob to hold in place. To adjust stand height, loosen screws at bottom of each leg until it is loose enough to move. Slide legs up or down to desired position and tighten screws back in place

Is this a comfortable chair to sit in for long periods of time?

When deciding whether or not a chair is comfortable to sit in for long periods of time, there are several factors to consider. The height and width of the seat, the material used for the padding, and how adjustable the chair is all play a part in how comfortable an individual will find it.

The egg chair with stand featured here has a wide, cushioned seat that should be comfortable for most people. The backrest slopes inward slightly so it provides good support without being too stiff. Additionally, this chair is fully adjustable, allowing users to customize it to their own body size and preferences. For these reasons, we believe this chair can be comfortably enjoyed for extended periods of time.

Safety work boots now being considered for hospitality

With the world going health and safety mad it is no surprise that that hospitality is being looked for how they carry out their business. With lockdowns most cafes and restaurants have been severely affected by restricted opening hours and this is before we get into the health and safety standards for the kitchens. Although it is important to make sure that the kitchen is up to standard and this is something we definitely approve of, safety footwear in a restaurant does seem a tad excessive.

Chefs for example will have to wear waterproof work boots and this is to ensure their safety in case of a hot water spillage in the kitchen. Whilst we do understand this could be a hazard it is unlikely a steel toe boot is necessary. Perhaps something like an S1 safety shoe would do the job as this would be some what waterproofed however we won’t get bogged down in these details here.

We do not agree that waiters and waitresses will have to wear S1 safety footwear as even if they drop something on their foot it is unlikely to have of a heavy object. Again a S1 style shoe could be worn here as they are pretty light but IF this is the case then it should be provided by the establishment and not the employee. Having taken a look online their are websites go to workbootsireland.ie that seem to have a range of this style for around the €50 mark so it is not going to be too big a ask for a business to provide these.

We do however not want to turn everything into a nanny state like some other countries and we fear that this could be the case with rulings like this. Another example of this, not in the work place but in society is that kids are not allowed to run around the school yard. This seems crazy and getting cuts and bruises is part of being a kid. Anyway as we said we will leave this argument for another post but just wanted to sight this here..

Do massage guns really help with muscle pain?

Over the last 2 years percussive massage guns have become really popular among athletes, physios, trainers and basically anyone who is looking for help with their distressed muscles. They look very similar to a standard power drill but instead of drilling nails these guns are made to help drill out any tight areas of the muscle. Massage guns vibrate your muscle with powerful, short burst which act just like getting a traditional massage. By doing this they increase blood flow to your muscle which then irons out these sore areas as well as delivering vital nutrients to these distressed areas.

Ask the physio: Sports massage

When they first hit the market a massage gun was costing approximately €500 which is quite expensive. Like anything however, the prices come down over time and not you can get a massage gun on sale for €129.00 or even less depending on where you shop. With these devices you can now massage your own muscles in your own home without the need to go to a physio therapy every time you need some muscle pain relief. That is not to say that there is no need for physiotherapists of course! They do a vital job and of course they are needed, but for muscle soreness after workouts this is a great tool for some home pain relief. Also not many people can afford to go to a physical therapist 2/3 times per week but they could be working out a few days a week and need massage therapy to keep the muscles working well.

By going to the gym you are tightening your muscles each time you are using them. Stretching after a workout is vital but so is massaging your muscle. Many athletes would foam roll after their workout but now they can use a massage gun and it is also much easier to use than a foam roller. So if you are suffering from muscle soreness try out a massage gun and see what they can do for you!

If you need a massage gun then head over to our sponsors at the massage gun Ireland store for more information.

Video Game Chairs – Comfortable Gaming in Style

X-Rocker Spider Wireless Game Chair

There are various ways to increase gaming experience, and one of the most effective that has long-term benefits is the video game chair. These chairs are made in different styles and with different materials, from vinyl to leather and cloth covering. Their main purpose is to offer a comfortable gaming experience.

Doctors have taught us that if we are spending too much time in front of a computer/LCD, we need to at least do it in a comfortable chair. One that not only relaxes our body but also stimulates our blood flow and prevents our muscles from becoming tense.

When it comes to their main style, there are four types of video game chairs: the rockers (these chairs can rock from one side to another), the sliders, and the regular chairs. The latter is not as common since building a rocker or a slider doesn’t add too much cost, and their additional functionality really does make a difference.

Video game chairs look more or less like office chairs. Since players tend to move in their chairs more than office workers do, they are looking for a bit more comfort in their chairs. A gaming chair mat will also be a wise acquisition when buying a video game chair. This will prevent damage to the floor or carpet.

Gaming chairs often have pockets on their sides for storing various types of controllers and game accessories. Other have even more stuff such as wireless surround sound to extend the gaming experience even more. Some gaming chairs from housetech also come with special mounts for gear shifts, steering wheels, joysticks, and other types of controllers.

The price range for a video game chair various a lot. For younger kids, a $50-100 chair is usually a good investment, however, an adult will require a more robust chair that can cost $500 or more. Of course, the player’s preferences must be taken into account when purchasing a video game chair.

Early History of Video Games

The evolution of video games can be traced to the year 1947. Thomas T. Goldsmiths Junior working with Estle Ray Mann came up with what is now referred to as the first video game. Theirs was a very simple video game that relied on cathode ray tube technologies existent at the time. It is the first video game to have been patented. Records indicate this was done in December 1948. The device was analog and did not use digital technology.

This paved way for numerous inventions. Each passing year from then has seen a tremendous improvement in video game devices. As the world advanced to the computer age, video games were not left behind. In the 1950s, video games for computer applications were developed in Britain and in the USA. This period saw a few video games successfully launched. Examples included draught computer games, NIMROD, Mouse in the Maze, and Tennis for Two among other success stories. This marked the transition from analog video games to digital video games. Several other inventions followed into the sixties.

Moving fast forward into the seventies saw the introduction of video arcade games and console representatives. These were major milestones in the history of video games. Most of these inventions were being carried out as a hobby by university students. The income potential provided by video games had yet to be fully taken advantage of. However, as days went by, established firms started marketing video games extensively.

The period from the late eighties onwards has been marked by an increase in complexity and sophistication in computer games. The future looks bright.